Easy Guide to ZTE Z5157V Screen Replacement Firmware: Everything You Need to Know


Are you facing issues with your ZTE Z5157V screen? Is it damaged or not functioning properly? If yes, then replacing the screen could be a viable solution. In this guide, we will provide you with an easy step-by-step guide on how to replace the screen of your ZTE Z5157V device.

Things you will need:

  • Replacement screen
  • Screwdriver kit
  • Plastic opening tools
  • Adhesive tape

Step-by-step guide for ZTE Z5157V screen replacement:

Step 1: Turn off your device and remove the battery

The first step is to ensure that your device is turned off. After that, remove the back cover and take out the battery from your ZTE Z5157V device.

Step 2: Unscrew the screws and remove the frame

Next, use the screwdriver kit to unscrew all the screws from the bottom of the device. Then, use the plastic opening tools to remove the frame of the device.

Step 3: Remove the damaged screen

After removing the frame, gently pull out the damaged screen from the device. Use the plastic opening tools to remove any adhesive or other components attached to the screen.

Step 4: Install the replacement screen

Carefully install the replacement screen in the same position where the damaged screen was placed. Use adhesive tape to secure the screen in place.

Step 5: Reassemble the device

Put the frame back onto the device and tighten all the screws using the screwdriver kit. Then, insert the battery and back cover onto your ZTE Z5157V device.

Step 6: Test the new screen

Turn on your device and test the new screen to ensure that it is functioning properly. If everything is working fine, then congratulations! You have successfully replaced the screen of your ZTE Z5157V device.

ZTE Z5157V firmware: Everything you need to know

Firmware is an essential component of any electronic device. It is a type of software that controls the functioning of different hardware components of your device. Here are some important things you should know about the firmware of your ZTE Z5157V device:

What is firmware?

Firmware is a set of instructions that are programmed into the hardware of your device. It acts as a bridge between the hardware and the software of the device.

Why is firmware important?

Firmware is important because it controls the functioning of different hardware components of your device. Without firmware, your device would not be able to perform any tasks.

How to update firmware on ZTE Z5157V?

To update the firmware of your ZTE Z5157V device, follow these steps:

  1. Go to the settings menu of your device
  2. Select ‘About phone’
  3. Click on ‘System updates’
  4. If an update is available, click on ‘Download’ and then ‘Install’

What to do if firmware update fails?

If the firmware update fails, then you can try the following steps:

  1. Make sure that your device is fully charged
  2. Ensure that you have a stable internet connection
  3. Clear cache and data of the ‘System updates’ app
  4. If nothing works, then you can try to install the firmware manually using a computer

Overall, replacing the screen of your ZTE Z5157V device and keeping the firmware updated are important steps to ensure the smooth functioning of your device.

Opening Hours

Mon – Sat 9 am to 6 pm
Sun – 10 am to 3 pm